Wu WF, Li Y, Bulk metallic glass formation near intermetallic composition through liquid quenching, APPLIED PHYSICS LETTERS Volume: 95 Issue: 1 Article Number: 011906, 2009.
Han Z, Wu WF,
Li Y,
Wei YJ, Gao HJ, An instability index of shear band for
plasticity in metallic glasses, ACTA MATERIALIA, Volume:
57 Issue: 5 Pages: 1367-1372. 2009.
Li Y, Guo Q, Kalb JA,
CA Thompson, Matching Glass-Forming Ability with the Density
of the Amorphous Phase, SCIENCE, Volume: 322 Issue: 5909
Pages: 1816-1819, 2008.
Wu WF, Li Y, Schuh
CA, Strength, plasticity and brittleness of bulk metallic
glasses under compression: statistical and geometric
effects, PHILOSOPHICAL MAGAZINE, Volume: 88 Issue: 1
Pages: 71-89, 2008.
Wu WF, Han Z,
Li Y, Size-dependent
"malleable-to-brittle" transition in a bulk metallic glass,
APPLIED PHYSICS LETTERS Volume: 93
Issue: 6 Article Number: 061908, 2008.
Jia P, Guo H,
Li Y,
Xu J, Ma E, A new Cu-Hf-Al ternary bulk metallic glass with
high glass forming ability and ductility, SCRIPTA MATERIALIA
Volume: 54 Issue: 12 Pages: 2165-2168 2006.
Dai CL, Guo H, Shen
Y, Li Y, Ma E, Xu J, A new centimeter-diameter Cu-based bulk
metallic glass. SCRIPTA MATERIALIA Volume: 54 Issue: 7
Pages: 1403-1408, 2006.
Ma H, Zheng Q, Xu J,
Y. Li, E. Ma, Doubling
the critical size for bulk metallic glass formation in the
Mg-Cu-Y ternary system, JOURNAL OF MATERIALS RESEARCH
Volume: 20 Issue: 9, 2005.
Ma D, Tan H, Wang D,
Y. Li, E Ma, Strategy
for pinpointing the best glass-forming alloys, APPLIED
PHYSICS LETTERS Volume: 86 Issue: 19
Article Number: 191906, 2005.
Wang D, Tan H,
Li Y,
Multiple maxima of GFA in three adjacent eutectics in Zr-Cu-Al
alloy system - A metallographic way to pinpoint the best
glass forming alloys, ACTA MATERIALIA Volume: 53 Issue:
10 Pages: 2969-2979, 2005.
Ma H, Shi LL, Xu J,
Discovering inch-diameter metallic glasses in
three-dimensional composition space, APPLIED PHYSICS
LETTERS Volume: 87 Issue: 18 Article Number: 181915,
2005.
Wang D,
Li Y, Sun
BB, Sui ML, Lu K, Ma E, Bulk metallic glass formation in the
binary Cu-Zr system, APPLIED PHYSICS LETTERS Volume: 84
Issue: 20 Pages: 4029-4031, 2004.
Lee ML,
Li Y, Schuh
CA, Effect of a controlled volume fraction of dendritic
phases on tensile and compressive ductility in La-based
metallic glass, ACTA MATERIALIA Volume: 52 Issue: 14
Pages: 4121-4131, 2004.
Conner RD,
Li Y, Nix
WD, Johnson WL, Shear band spacing under bending of Zr-based
metallic glass plates, ACTA MATERIALIA Volume: 52 Issue:
8 Pages: 2429-2434, 2004
Hu X, Ng SC, Feng
YP, Y. Li, Glass forming ability and in-situ composite
formation in Pd-based bulk metallic glasses, ACTA
MATERIALIA, Volume: 51 Issue: 2 Pages: 561, 2003.
Tan H, Zhang Y, Ma
D, Feng YP, Y. Li, Optimum glass formation at off-eutectic
composition and its relation to skewed eutectic coupled zone
in the La based La-Al-(Cu,Ni) pseudo ternary system, ACTA
MATERIALIA Volume: 51 Issue: 15 Pages: 4551-4561,
2003.
Basu J, Nagendra N,
Li Y, Ramamurty U, Microstructure and mechanical properties
of a partially crystallized La-based bulk metallic glass,
PHILOSOPHICAL MAGAZINE, Volume: 83 Issue: 15 Pages:
1747-1760, 2003.
Ramamurty U, Lee ML,
Basu J, Li Y, SCRIPTA MATERIALIA, Embrittlement of a bulk
metallic glass due to low-temperature annealing, Volume:
47 Issue: 2 Pages: 107-111, 2002.
Tan H, Zhang Y,
Li
Y, Synthesis of La-based in-situ bulk metallic glass matrix
composite, INTERMETALLICS Volume: 10 Issue: 11-12
Pages: 1203-1205, 2002.
Nieh TG, Schuh C,
Wadsworth J, Y. Li, Strain rate-dependent deformation in
bulk metallic glasses, INTERMETALLICS Volume: 10 Issue:
11-12 Pages: 1177-1182, 2002.
Lu ZP, Tan H,
Li Y,
S.C. Ng, The correlation between reduced glass transition
temperature and glass forming ability of bulk metallic
glasses, SCRIPTA MATERIALIA Volume: 42 Issue: 7 Pages:
667-673, 2000.
Yao HB,
Li Y, Wee ATS, An XPS investigation of the oxidation/corrosion of
melt-spun Mg, APPLIED SURFACE SCIENCE Volume: 158 Issue:
1-2 Pages: 112-119, 2000.
Nagendra N,
Ramamurty U, Goh TT, Y. Li, Effect of crystallinity on the
impact toughness of a La-based bulk metallic glass, ACTA
MATERIALIA Volume: 48 Issue: 10 Pages: 2603-2615,
2000.
Lu ZP,
Li Y, Ng SC, Reduced
glass transition temperature and glass forming ability of
bulk glass forming alloys, JOURNAL OF NON-CRYSTALLINE SOLIDS
Volume: 270 Issue: 1-3 Pages:
103-114, 2000.
Lu ZP, Goh TT,
Li Y,
Glass formation in La-based La-Al-Ni-Cu-(Co) alloys by
Bridgman solidification and their glass forming ability. ACTA MATERIALIA Volume: 47 Issue: 7 Pages: 2215-2224,
1999.
Wang XZ,
Li Y, Ding
J, Si L, Kong HZ, Structure and magnetic characterization of
amorphous and crystalline Nd-Fe-Al alloys, JOURNAL OF ALLOYS
AND COMPOUNDS Volume: 290 Issue: 1-2 Pages: 209-215,
1999.
Lu K,
Li Y, Homogeneous
nucleation catastrophe as a kinetic stability limit for
superheated crystal, PHYSICAL REVIEW LETTERS
Volume: 80 Issue: 20 Pages:
4474-4477, 1998.
Li Y, Ng SC, Lu ZP,
Lu K, Separation of glass transition and crystallization in
metallic glasses by temperature-modulated differential
scanning calorimetry PHILOSOPHICAL
MAGAZINE LETTERS Volume: 78 Issue: 3 Pages: 213-220,
1998.
Li Y, Ng SC, Ong CK, Z.P. Lu, Glass forming ability of bulk glass forming
alloys,, SCRIPTA MATERIALIA Volume: 36 Issue: 7 Pages:
783-787, 1997
